Looking for professional electrical fault finding in East London or South East London?
Our experienced team excels in diagnosing and resolving electrical problems, employing the latest diagnostic tools to quickly identify issues within your electrical system. Whether you’re facing flickering lights, tripped circuits, or unexpected power outages, we provide swift and effective solutions to restore the safety and functionality of your electrical setup. Trust our electrical fault finding expertise to address your needs with precision and care, ensuring your home or business is both safe and efficient.
Got questions? Want to book an appointment? Give us a shout!
In this article we'll cover:
What causes fuse box to trip?
The most common type of electrical fault is often indicated by a tripping fuse box, which, although it can be a bit of a headache, serves as your electrical system’s way of telling you something’s not right. Here’s a rundown of common culprits:
- Overloaded Circuits: This is the biggie. When too many appliances are running at the same time on the same circuit, it can overload, causing the fuse box to trip. It’s like having too many cooks in the kitchen – things get crowded and overheated
- Short Circuits: A bit more serious, this happens due to various reasons, such as damaged cables, faulty appliances, or improper wiring connections. The term “short” signifies that the electrical flow has found a shortcut back to its source, bypassing the normal, longer route through the circuit’s components like lights, outlets, and appliances.
- Ground Faults: Similar to a short circuit, ground faults happen when the insulation of wires is damaged or when a live wire comes into direct contact with a grounded part of an electrical system. This can be due to physical damage, deterioration over time, or exposure to water or moisture.
- Faulty Appliances or Wiring: Sometimes, an appliance or its wiring can go kaput, causing shorts that trip the breaker. Or, if your house wiring is old or damaged, it might not be up to handling the load.
If your fuse box keeps tripping, it’s a good idea to figure out why, sooner rather than later. Sometimes, it’s an easy fix, like unplugging a few things or resetting the breaker. Other times, especially with wiring issues or frequent trips, it’s safer to call in a professional. That’s where we come in – if you’re in East London or South East London and need a hand, give us a shout at Edwin’s Electrical Services. Stay safe and don’t let those trips trip you up!
What to do when a fuse trips?
When a fuse trips, it’s like your electrical system’s way of saying, “Hold up, something’s not quite right here.” No worries, though, here’s a simple step-by-step guide to get you back on track:
Stay Calm and Be Safe: First things first, ensure your safety. If it’s dark, grab a flashlight.
Identify the Tripped Fuse or Circuit Breaker: Head over to your fuse box or consumer unit. You’ll likely see a switch that’s flipped to the “off” position or a fuse that’s blown if you’ve got an older system.
Unplug and Switch Off Appliances: Before you reset anything, unplug appliances and turn off all the switches in the affected area. This helps prevent the circuit from overloading again when you reset it.
Reset the Circuit or Replace the Fuse:
If it’s a circuit breaker that’s tripped, flip it back to the “on” position. Give it a firm push; some breakers need a bit of encouragement.
If you’ve got a fuse that’s blown, you’ll need to replace it with a new one that has the same amperage rating. Always make sure you’re using the correct type and rating to avoid any further issues.
Turn Back On: Once the circuit is reset or the fuse is replaced, gradually turn on your appliances and lights one at a time. If everything stays on, you’re likely in the clear.
Identify the Cause: Try to figure out what caused the trip. Was it a dodgy toaster? Too many appliances on at once? Knowing the cause can help prevent future trips.
When in Doubt, Shout: If the circuit trips again or you’re not confident about what to do, it’s time to call in the pros. Electrical issues can be tricky and, more importantly, dangerous.
How much does electrical fault finding cost?
When it comes to Electrical Fault Finding, we’re experts at identifying those electrical gremlins with our top-notch diagnosis and testing techniques. We’re proud to say that about 90% of electrical issues are resolved within the first hour, meaning you can get back to your day with minimal disruption.
Fault Finding Pricing:
- Quick Fixes (90% of Problems):
£70.00 for the First Hour
Plus materials, if needed. Most issues are sorted within this time, making it both efficient and cost-effective.
- More Complex Issues:
- £120.00 for the First 2 Hours
This covers those trickier problems, and in most cases, we’ll have identified and likely fixed the issue within this timeframe. If it’s minor, we’re on it. However, for more intricate troubles that might need a bit more elbow grease, such as rewiring or replacing parts, we’ll let you know and provide a separate quote for any additional work required.
AREAS WE SERVE
Our Clients
Don’t just take our word for it
Why US?
Here are
a few Reasons
Why
1. Our customers are very happy with our services
Our customer testimonials are a testament to our excellence. Sporting a gleaming 5-star rating on Google and a cracking score of 9.89 out of 10 on checkatrade.com, it’s clear we’re on to a winner.
2. We Provide a Quote Before Dipping into Your Pocket
We’re all about keeping things above board with our pricing. Every quote we give is fixed and gets the green light from you before we kick off, ensuring no unwelcome surprises. Do have a gander at our rates for more specifics.
3. We Don’t Muck About
We pride ourselves on our work, and that includes leaving your place spick and span. Our electricians are not only top-notch at their craft but also ace at tidying up afterwards, so your space stays immaculate.
4. We’re As Punctual As a Swiss Watch
Booked one of our engineers? We’ll be there on the dot, so no need to waste your day waiting around.
5. Our Credentials Are Top-Notch
It might seem like a given, but you’d be gobsmacked at the number of dodgy operators out there. From the National Inspection Council for Electrical Installation to the City & Guilds, we’ve got all the credentials.
6. We’re a Friendly Bunch
We’re not ones to toot our own horn, but nothing grinds our gears more than a surly tradesperson, especially in a pinch. Being cordial is just part of the service.
7. Our Workmanship Is Guaranteed
In cahoots with reputable electrical wholesalers, we’ve got you covered should your job need new parts. Rest easy knowing the quality of our work is assured.